1
4000
Available Turnkey, Bulk or Piecemeal
Wet Side Material Handling & Prep
Neilsen & Hiebert Systems Pulper Feed Conveyor (8’W x 75’L with 20′ Load Section, 10 hp VFD Motor); (2) Automatic Bale Wire Cutters (Model 2310 Wire Hawg II) with 75 hp Hydraulic Unit, 3 hp Kidney Loop Motor & Allen Bradley PanelView Plus Controls…
Wet Side Pulping
Kadant 10DR Hydrapulper (2,000-Cu. Ft., 81.6″ Vortech Rotor, 600 hp Motor); Kadant Trash Well (4,904-Gal.) & Wash Tower (4,117-Gal.); Kadant Hydrapurge II-X Detrasher (1,148-Cu. Ft., 200 hp); Kadant Ragger (W105) & Rag Rope Cutter; Kadant Primary (Ultra V-500) & Secondary (Ultra V-300) & Tertiary Coarse Screens with Float Purger; (2) Kadant LC17 Liquid Cyclone HD Cleaners (1,450–2,000 gpm ea.); Bellmer Kufferath AKUPRESS AP 500 Coarse Rejects Screw Press (500mm); GE & Goulds Motors and Pumps throughout…
Wet Side Dewatering
Cantilevered Drum Screens & Slotted Drum Screens (Kadant); (2) Primary Screw Presses & (4) Secondary Screw Presses (Kadant VPK Series, 150–250 hp GE VFD Motors); (2) Gravity Disc Pre-Thickeners (Bellmer/Kufferath AKSE F 300-05, 55-kW VFD); Suez Saturn S500 Clarifier (11,500-Gal.) with Dissolution Pipe & Flocculant/Coagulant Skid; Dump Chest Tank (182,000-Gal.) & Excess White Water Tank (114,000-Gal.) (Superior Tank Co.); (3) AFC FRP White Water Tanks (10,000-Gal. ea.); Kadant Sand Separator; Transfer Conveyors; Multiple Process Pumps – Goulds, Baldor, Gorman-Rupp, Teco Westinghouse, Poseidon; Chemical Metering Pumps (Flocculant, Coagulant, Biocide); Lube & Seal Water Systems…
Drying System
Rotary Drum Dryer System (TSI, 16′ x 70′, 146,124-cfm, 500°F, 792 BHP) with 75 hp VFD Dryer Drum, Trunnion Assembly, Dryer Combustion Fan (150 hp Toshiba Drive Motor), Hauck Burner, Clarage ID Fan, Cyclone; Dryer Output Bypass Bunker Infeed Conveyor
Baling & Packaging
(2) PAAL HTR 625 C High Compression Two-Ram Balers (198-Ton Pressing Force, 55-kW Drives, Siemens Simatic HMI Controls); Cranston Bale Packaging Line (4,000-Lb. Capacity) with Pneumatic Enfold, Econowrapper, EP Wire Strapper, Samuel Bundler, Scale, Labeler, Chain Shuttle Conveyors, Turntables…
Plant Support & Utilities
Generac SG150 150-kW Natural Gas Backup Generator; (2) Kaeser BSD 60 Rotary Screw Air Compressors (60 hp ea.); Kaeser KADEC3-260 Air Dryer (260-cfm); 1,040-Gallon Air Receiving Tank; Miller Big Blue 300R Pro Welder Generator; Main Distribution Switchboard, MCCs, VFDs, Panel Boards, Transformers, Conduit & Wiring; ~$250K in Spare Parts incl. Spare Pulper Motor, Rotor, Gearbox & Dryer Motor; Lab Equipment (Brightness Meter, Strength/Tensile Testers, Moisture Analyzers, Tearing Tester, Pulp Disintegrator & Beater)…
Additional Information
~$85M Replacement Cost (Today’s Dollars) | Never Operated | All Equipment 2022 & Newer | 600 TPD Processing Capacity | 200,000 MT/Year URP Output | Strategically Located Near Port of Norfolk for Domestic Feedstock & Export Logistics | Kadant Black Clawson Pulping Technology | Bulk Handling Systems (BHS) Engineered Facility | Available Turnkey, in Bulk, or Piecemeal
Click Here: View the 3D video of the facility
For more information, contact John Coelho via email: jcoelho@tigergroup.com or call (617) 797-0430.
Processing
Asset Site Location
Chesapeake, VA
Custom 4
Pickup Location
Mfg
Warranty
ALL SALES ARE FINAL: All items are sold “as-is, where-is” with no guarantees or representations. All Sales Are Final. Buyers are recommended to inspect items before they bid.
ALL ITEMS SUBJECT TO PRIOR SALE
Auctioneer has the right to add or delete lots for the sale at any time as well as to cancel the sale entirely or sell in bulk.
Terms and conditions
The following highlights key sale terms and identifies sale specific terms. These, along with our General Terms of Sale, comprise the Complete Terms of Sale. Please review the following and download the General Terms of Sale here to confirm the responsibilities you are agreeing to upon participating in this sale.
TERMS AT-A-GLANCE
We will pre-authorize your credit card for $300 as an Auction Registration hold, and reserve the right to increase the deposit to equal 25% of your total high bids. This pre-authorization will place a 3-7 day hold on these funds with your credit card company, but will not be charged unless purchases are made.
If you are a NON-US resident, you will be asked to submit a deposit prior to the auction in order to finalize your registration approval. Please contact our office at (805) 497-4999 for further assistance.
All deposits made by wire transfer or firm and personal check accompanied with a bank letter of guarantee will be returned within 7 days unless purchases are made.
PAYMENT DEADLINE: All payments are due by 12 pm the day after the auction closes.
PAYMENT FORMS: Credit cards on file will be charged (up to $2,500) upon the completion of the sale. You may pay by wire transfer by (a) notifying Tiger prior to the close of auction, AND (b) submitting payment in time for Tiger to receive it no later than 12pm the day following the auction.
Buyer is responsible for any bank charges incurred for processing wire transfers (Please note that it is common for your bank as well as intermediate banks to charge a fee).
PURCHASES OVER $2,500: Balances in excess of $2,500 must be settled by wire transfer received by Tiger no later than 12pm the day following the auction.
BUYERS’ PREMIUM: An 18% Buyer’s Premium will be added to the price of each item.
SALES TAX: All Taxes are applied at the end of the auction unless a reseller has notified Tiger prior to the close of auction and qualifies for sales tax exemption. A buyer’s failure to qualify for exemption does not waive its obligations to complete its purchase per the terms of sale.
REMOVAL: All buyers are responsible to remove their items during the posted checkout times. To minimize wait time, all buyers are asked to schedule an appointment. Buyers are also responsible to bring their own crews, packing materials, material handling equipment & etc. for removal. Buyers requiring shipping or moving assistance can refer to our list of 3rd party shippers.
ALL SALES ARE FINAL: All items are sold “as-is, where-is” with no guarantees or representations. All Sales Are Final. Buyers are recommended to inspect items before they bid.
ALL ITEMS SUBJECT TO PRIOR SALE
Auctioneer has the right to add or delete lots for the sale at any time as well as to cancel the sale entirely or sell in bulk.
